SERVICE HOTLINE

0312-3268050

Your location:Home page > News > Industry dynamic
Industry dynamic

High voltage testing instrument: on-line testing technology for high voltage electrical equipment

Add time:2021-01-21  

The principle of online detection technology is: under the condition of normal operation of power equipment, after measuring the conventional insulation characteristic parameters (current through the equipment insulation, capacitance, dielectric loss factor Tan δ), so as to reflect the status of equipment operation and whether there is a problem. The dielectric loss factor Tan δ is the key parameter affecting high voltage electrical equipment, equipment operation problems tanδ can be reflected in time, high sensitivity, simple online operation control.

The principle of online detection of TAN δ has two key: one is through the hardware phase Angle direct measurement, the key is the zero-crossing phase contrast method, voltage contrast method; One is to obtain tanδ value by digital processing of the measured signal after a/ D transformation by software. The key is harmonic analysis.

Principle of zero-crossing phase contrast method: To get the current signal and voltage signal I had zero plastic u, let it become a zero to flip the square wave with u, I use a "or" gate contrast the I and u had zero time difference square wave width t (t = 90 °, the delta), square wave with high frequency clock pulse width t read, according to the clock pulse number n and periodic delta t, t = n delta t use formula, The width of T can be calculated, and then calculated according to the voltage and current signal frequency.

All products developed by the independent intellectual property rights system, pay attention to intelligent, practical, close attention to the needs of users in multiple aspects, considerate design, innovation. Quality management strictly follows the iso9001:2008 quality management system standards, using professional advanced production technology and equipment, automated test equipment, the strict material and product testing means, strict on the whole process of quality control, ensure the established quality management goal, efforts to put every product into industry products.

Baoding Jinke Hui Electronic Co. Ltd.

Phone:0312-3268050

Email:jkh200888@126.com/ bdjkh@bdjkh.com

Url:http://www.sanjin.net

Address:China, baoding high-tech zone, road no. 123 of hua wei control mechanical and electrical industrial park 1-401

Mobile station

Copyright ? Baoding Jinke Hui Electronic Co. Ltd. All Rights Reserved  冀ICP備19023900號(hào)-1   Web site productionSanjin
HomePhoneProduct